Non Contact Medical Infrared Thermometer , Professional Forehead
Thermometer
Introduction
The infrared thermometer used to measure the temperature of the
human body is called the human infrared
thermometer. But it must be clarified that there is no special
medical or industrial infrared thermometer, because
the manufacturing principles of infrared thermometers are the same.
There are only high precision, high distance
coefficient ratio, high performance infrared thermometers and low
precision, low distance coefficient ratio and low
performance infrared thermometers. As long as the emissivity of the
infrared thermometer is set to 0.95 (the
emissivity of human skin is generally this value, even if there is
a difference, the impact is only within 0.3
degrees), it is in line with the requirements of human body
temperature measurement.
Advantage
1. Non-contact, no need to touch each other when measuring human
temperature, avoiding the danger of infection and
ensuring safety
2, rapid temperature measurement, accurate readings, suitable for
rapid investigation of a large number of people
3. It is not necessary to enter the ear canal when measuring body
temperature, and it is not necessary to replace
earmuffs, which is clean and hygienic.
4, laser positioning, accurate measurement of the temperature of
the target site, can measure the body temperature
of the forehead, underarms, body surface, etc.
5. The temperature limit can be set, and an audible alarm will be
issued when the limit temperature is exceeded,
and the abnormal temperature in the crowd can be accurately
checked.
6, infrared temperature measurement, no harm to human body
Please pay attention during use
1. When measuring body temperature, the ambient temperature is
preferably between 16 ℃ -35 ℃, lower or higher may affect the
accuracy of the measurement.
2. A cold compress on the forehead of a fever patient, sweating and
other cooling measures will make the measurement result lower, and
measurement should be avoided in this case.
3. The environment around the person to be measured should be
stable, and can not be measured in the air flow circle such as the
fan, air outlet of the air conditioner.
4. Do not use the product outdoor or in a place with strong
sunlight.
5. It is recommended to measure about 3 times each time, which is
based on the most displayed data.
